Potassium Hydroxide Doped With (Poly(Methyl Methacrylate) (PMMA) Polymer as Electrolyte for Electrolytic Double layer Supercapacitor (EDLC) Application

Authors

  • Ibrahim Zakariya’u Department of Physics, Sokoto State University, Sokoto
  • Abubakar A. Sifawa Department of Physics, Sokoto State University, Sokoto

DOI:

https://doi.org/10.4314/cajost.v4i1.20

Keywords:

Polymer electrolyte, conductivity, DSC, FTIR

Abstract

The prime objective of the present paper is to develop polymer electrolytedoped with salt. A solution cast technique was adopted to develop a solid polymer electrolyte of polymer (Poly (methyl methacrylate) (PMMA) as host polymer and salt potassium hydroxide, KOH as dopant. Incorporation of salt increases the amophosity and homogeneity, decreases the surface roughness. Moreover, doping of salt (KOH) increases the overall conductivity of polymer electrolyte film. Electrochemical impedance spectroscopy (EIS) reveals the
enhancement in conductivity (4 orders of magnitude) by salt doping. FTIR shows the complexation and composite nature of films. Polarized optical microscopy (POM) shows reduction in crystallinity which is further confirmed by Differential scanning calorimetry (DSC). Fabricated electrochemical doublelayer supercapacitor using maximum conducting polymer salt electrolyte and symmetric carbon nanotubes electrodes shows specific capacitance of 21.86.

Downloads

Published

09/11/2021

Issue

Section

Articles

How to Cite

Potassium Hydroxide Doped With (Poly(Methyl Methacrylate) (PMMA) Polymer as Electrolyte for Electrolytic Double layer Supercapacitor (EDLC) Application. (2021). CaJoST, 4(1), 87-92. https://doi.org/10.4314/cajost.v4i1.20

Similar Articles

1-10 of 22

You may also start an advanced similarity search for this article.