Characterization and Modification of Activated Carbon Generated from Annogeissus Leiocarpus

Abstract

Activated carbon (AC) is a versatile adsorbent that is used in the treatment of waste water, colour, odour removal and CO2 capture. Annogeissus leiocarpus is one of abundant agricultural precursor that can be used for the production of activated carbon. Characterization was done to investigate some proximate parameters. The modifications were made by soaking AC in 40% H2SO4 and
40% NaHCO3 for 24hours in the ration of 1:3 w/v. The FT-IR and SEM was conducted for surface functional group and morphology respectively. The result of this study revealed that the activated carbon produced possessed high yield, low Ash content, low Burnt off, low moisture content Average bulk density and large pore volume. The results from FT-IR analysis identified appearance and disappearance of carbonyl and hydroxyl groups which contributed in the creation of more adsorptive site for adsorption process. The results for SEM indicated the development of pores all over the surface of adsorbent with Acid modified activated carbon (AMAC/ H2SO4) having the highest pore distribution followed by Base Modified Activated Carbon (BMAC/NaHCO3) and finally ordinary (AC). The results suggest that the modification of AC using Acid and Base can significantly enhance the surface properties which improves
adsorptive properties of the activated carbon produced and enhances it adsorption potentials for wastewater treatment